12m³ Concrete truck mixer / ISO & CE certificate
Specification
Hydraulic system
•The split hydraulic system features low cost and easy maintenance;
•The best hydraulic system assembly in the world.
•The company has good relationship with leading hydraulic system manufacturers. The hydraulic system is the most reliable, featuring compact structure and easy maintenance.
•The hydraulic pump suspension frame adopts U type bolt fixing, featuring good interchangeability and easy maintenance; It adopts Sauer hydraulic oil pump, motor and reducer.
Water supply system
•Large water tank capacity; One-time water using cycle is long;
•Pneumatic type water supply; Washing system, high water supply pressure, clean the feeding hopper and, discharging slot, tank and other equipment;
•One switch on the bottom of the cleaning system, which can discharge the water completely in winter.
•The water pump and shower nozzle are arranged reasonably, which are easy to operate.
Operation system
•It adopts the control method of mechanical linkage, and optimize the traditional operation structure, which is easier and more reliable for the operator.
•The cab adds the internal operation handle, which is easy for operation without getting off.
•Control the mixing and discharging speed by the throttle, and load (acceleration) and unload (acceleration) the material.
•Optimize the operation reliability, and eliminate the safety loophole.
Feeding and discharging system
•Add the quick coupler for watering, and the optimized hopper is easy to feed and discharge the concrete;
•The feeding height of less than 3850mm is suitable for the mixer, and the upper of feeding hopper is less than 650mm;
•The discharging height of 1350mm-1550mm is suitable for the feeding inlet of the pump;
Upper electrical system
•The electrical system is in single line, with negative pole on iron. The line voltage is 24V.
•The electrical system consists of illuminator, hydraulic oil temperature control switch, relay, and fan motor. When the oil temperature is over 60°C, the temperature control switch will connect and the cooling fan will rotate; when the oil temperature is below 55°C, the temperature control switch will disconnect and the cooling fan will stop.
•The work lamp switch controls the work lamp.