Quick Details
- Model Number: nb
After-sales Service Provided: Engineers available to service machinery overseas
Type of furnace: mesh belt conveyor type continuous furnace
Max. operation temperature: 350
Normal operation temperature: 150~250
Heat source: electric heating
Temperature control: proportional integral derivative(PID) control with thyristor
Effective width and height in furnace: W1050 x H300mm
Outline dimensions: 6000(L) X 2140(W) X 2230(H)mm
Outer layer: steel plate welded structure (width thickness of 4mm)
air volume: Q=6064m3/h
total pressure: P=693Pa
Packaging & Delivery
| Packaging Details: | bare in container, one 40' container |
|---|---|
| Delivery Detail: | within 4 months after receivng down payment |
Specifications
Aluminum Brazing Furnace
1) PLC: famous brand from USA
2) Inverters & touch screen: Delta brand from Taiwan
This aluminum brazing furnace is in the role of the protection of nitrogen,using a non-corrosive flux brazing automotive aluminum intercoolers,water tanks,automotive air conditioning condenser,evaporator,warm air water tanks,aluminum oil coolers, etc.
1) Continuous brazing flux sprinking device; Flux mixing, supply and aeration devices
2) Drying furnace
3) Brazing front room
4) Welding furnace
5) Water cooling room
6) Brazing rear room
7) Cooling device
8) Water&nitrogen supply device
9) Electrical control system
1.Continuous flux sprinkling unit 1 set
General outline dimensions: 4500(L)x1450(W)x2750(H)mm
Effective width of belt conveyor: W1000mm
Max. opening dimension of the unit: 1100(L)×400(H)mm
Variable speed range of the belt conveyor: 100mm~1000mm/min, controlled by an inverter
Power of drive motor: N=0.75KW
Total weight of the unit: 1500kg
2.Drying furnace 1 set
Type of furnace: mesh belt conveyor type continuous furnace (with belt conveyor width of 1000mm)
Max. operation temperature: 350ºC
Normal operation temperature:150~250ºC
Heat source:electric heating
Temperature control: proportional integral derivative(PID) control with thyristor
Effective width and height in furnace: W1050×H300mm
Outline dimensions: 6000(L)×2140(W)×2230(H)mm
3.Heating furnace
Type of furnace: mesh belt conveyor type continuous furnace
Max. operation temperature: max. 650ºC
Heat source: electric heating
Temperature control: 6 zones, proportional integral derivative(PID) control with silicon control
Temperature rise of brazing furnace:The temperature should increase and decrease as per the procedure to protect the muffle cavity from distortion.
Effective width and height in furnace: 1050(W)×300mm(H)
Outline dimensions: 6000(L)×2140(W)×2230(H)mm
4.Electrical control
4-1Electrical control cabinet
(1) with 3 cabinets arranged in a row at the middle of the equipment
Electrical switch, voltage meter, current meter, electromagnetic open-close unit, subsidiary relay, indication light, etc.
Thyristor unit used for drying furnace2 sets
Used for brazing furnace12 sets
(2) Oxygen concentration meter (USA) 1 set
Type: 3000TA
Measurable range: 0-10/100/1000ppm.O2
Sprinkling pump: CDX200/12 (Italy)1 set
4-4Brazing furnace temperature control cabinet
5.Water, electricity and gas consumption of the unit
Contents | |||
Body of equipment | Electricity | Equipment capacity | |
450KW | |||
Cooling water | 8~10m3/h | ||
Pure water | Depending on the output | ||
Nitrogen | Dew point below -62°C The impurities in the nitrogen supplied to this unit should be within the following values: O2<10.0ppm H2<0.5ppm Ar<3.9ppm H2O<0.2ppm CO<0.5ppm CO2<0.2ppm Others<0.2ppm | Equipment supply capacity Consumption volume 80~120m3/h
| |
*Cooling watercirculated water usable
l PLC: famous brand from USA
l Inverters & touch screen: Delta brand from Taiwan
l Buttons, knobs and indicating lamps: famous brand from Korea
l Approaching switch: famous brand from Korea
l Small relays: famous brand from Japan or Korea
l Liquid leveler: from Korea
l Others: famous brands from domestic