QT4-18 Brick Molding Machine ,Hydraulic Pressure Brick Making Machine
1.Main technical specifications of QT4-18 Hydraulic Pressure Brick Making Machine:
| Overall Size | 3500(L)×2200(W)×2000(H)mm |
| Forming cycle | 15S |
| Carriage Size | 850(L)×550(W)×25(H)mm |
| Power | 19.55kw |
| Vibration frequency | 2800-4500/minute |
| Rated pressure | 15mpa |
| Total Mass | 4.0T |
2. QT4-18 Hydraulic Pressure Brick Making Machine Capacity:
| Block size | Pcs/mould | Pcs/h | Shift capacity(8h) | remark | ||
| 390*190*190mm | 4 |
720 | 5760 | Mould can be customized according to your request | ||
390*115*90mm
| 12 | 2160 | 17280 | |||
240*115*52mm
| 26 | 4680 | 37440 | |||
3.Related information of QT4-18 Hydraulic Pressure Brick Making Machine:
1).Area: Workshop area: 500sq.m,all factory area 2000-4000sq.m, the bigger, the better.
2). Workers: three-five.
3). Ratio of raw material:cement 8%-10% sand 30%-40% stone:50%-60%,about cement :sand : stone is1:4:5.
4).hollow block weight:
(390*190*190) :17KG,(190*140*190):13.5KG,(390*90*190):10KG
5). raw material consumption per day:200-340T
6). water consumption per day:3%-5% of raw material Weight.
4.Advantages of QT4-18 Hydraulic Pressure Brick Making Machine:
QT4-18 Hydraulic Pressure Brick Making Machine is one kind of advanced equipment,
which is of electro-hydraulic-mechanical integration and dialogue between man and
machine controlled by computer system. This machine is developped according to
international development tide and designed for domestic situation, which can be operated without any simple training.
Made of high-strength steel and by special welding procedure, this machine is very
firm. Its guiding columns are made of special super strong steel, which surfaces are
coated with cadmium, and have perfect torsional strength and wearing capacity. Its
material distributor, using sensor and hydraulic proportional driving technologies, can
produce forced centrifugal discharging under the function of swing and arc-breaking
mechanism to provide quick and even material distributing, specially suitable for producing
thin wall and perforated blocks. Under the control of computer, the material distributor can
produce vertical synchronous vibration by hydraulic driving system to carry out low
frenquency material distributing and high-frenquency block forming. And its multi- source
vibrating system can give perfect vibrating effect to different raw materials.
5.Production pressure of QT4-18 Hydraulic Pressure Brick Making Machine :
Hollow blocks can reach 8-10Mpa,Solid bricks can reach 10-15Mpa,so they have a high
pressure,can be used widely.
6.Raw materials of QT4-18 Hydraulic Pressure Brick Making Machine :
Wide range of raw materials could be adopted such as fly ash, coal residue, coal wastes,
chemical residue, sand, stone, concent, cement, construction wastes and so on. therefore, it is
a new type of machine which has the characteristics of energy conservation and environmental
protection.
7.Installing and after service of QT4-18 Hydraulic Pressure Brick Making Machine:
we can send our engineer to install and commissioning the block machine and train your
workers.
Pre-stressed Hollow Core Purlin Making Machine
Hot Sale! Aluminum Colored Roof Tile Making Machine Made in China