This kind of crane system is double beam crane or single beam crane hooked with multi-peel grab. Peel grab could be mechanical type ,electric type or electric hydraulic type, working indoor or outdoor.
Product Application:
This kind of crane is widely used for steel mill as steel scrap charging crane. Or used in port loading or unloading work for scrap material.
Features:
High efficiency
Durable long life using.
Customerized design
Easy maintenance
through beam is shortened,high strength,light self weight;
main shaft sleeve is of bearing steel, Pin shaft material is 40Cr,
High temperature resistant bearing for pulley,
knife edge plate adopts wear-resisting steel plate,adopts multilayer sealing craft,
dirt proof and water proof and it could be underwater operation.
Clearance of two knife dege plate is very small,0.3mm,good sealing, keep working site clean.
whole structure is strong and not distortion, good sealing.
Technical Data:
Liting Capacity (T) | 5 | 10 | 16 | 20 | |||
Max.Lifting Height (M) | 20 | 18 | 22 | 26 | |||
Span (M) | 10.5-31.5 | ||||||
Working System | A6 | ||||||
Speed (M/Min) | Trolley | Hoisting | 40.1 | 40.7 | 41.8 | 48.6 | |
Travelling | 44.6 | 45.7 | 43.2 | 43.2 | |||
Bridge travelling | 93.7-114.4 | 112.5-101 | 98-87.3 | 87.3 | |||
Weight (T) | Trolley | 5.2/5.9 | 8.2/9.1 | 14.8/15.9 | 19.3/20.4 | ||
Total | Indoor | 19.9-41.3 | 26.5-50.4 | 47.3-67.9 | 56.1-75.6 | ||
Outdoor | 20.7-42.1 | 27.4-51.2 | 48.5-69 | 57.3-76.8 | |||
Grab | Volume (CUM) | 2.5-0.75 | 5-1.5 | 8-2.5 | 10--3 | ||
Dead weight (KG) | 2632-2546 | 4800-4793 | 7841-8305 | 9812-10123 | |||
Rail recommended | 43kg/m, QU70 | ||||||
Power Source | 3Phase AC 380V 50HZ (As your demand) |