Structure of Building Hoist
SC Hoist is a rack and pinion EL. Lift, used on construction site for transportation of personnel and materials. It is installed and dismounted conveniently and can grow as high as the building grow in height.
There're single cage and two cages hoists. A single cage can be quickly transformed into twin cages hoist by adding a cage and other parts. The hoist payload can be increased by adding counterweight equipment.
SC hoist has reliable electrical and mechanical safety device, it is efficient and safety vertical transporting equipment.
Building hoist Specifiction
| Model | SC120 | |
| Main technical data | Unit | Value |
| Rated load | Kg | 1200 |
| Rated erection load | Kg | 1200 |
| Jib attachment rated load | Kg | 300/600 |
| Cage size (LXW) | m | 3.0x1.3 |
| Max. Lifting height | m | 450 |
| Lifting speed | M/min | 33 |
| Rated power | kW | 2x11 |
| Voltage | V | 380/440 |
| Frequency | Hz | 50/60 |
| Current | A | 2x23.2 |
| Power supply fuses | A | 63 |
| Protective class | / | IP55 |
| The durative rate of electrifying | / | FC-25% |
| Safety device | M/s | 1.2 |
| Enclosure weight | Kg | 980 |
| Cage weight | Kg | 2000 |
| Counterweight | Kg | / |
| Mast section weight | Kg | 125/140/160/180 |
| Mast section length | mm | 1508 |
Building Hoist Images
FAQ of Building Hoist
Q: What is the building hoist main purpose?
A: Building hoist equipped with double or single cabin to transport the materials and labors up and down. It's the ideal
construction equipment for vertical transportation in the field of construction.
Q: What is the main structure of building hoist?
A: The P/M construction hoist mainly contains metal structure, driving system, electrical control system, cable guide &
protection system, electrical top crane and safety device.
Q: What is the meaning of the building hoist’s code?
A: Take SC200/200 for example: “SC” stands for rack and pinion hoist, “200/200” stands for double cage and capacity
is 2 tons per cage. “SC200” stands for single cage and capacity is 2 tons.
Q: What is the dimension of the cage?
A: Normally the cage dimension is 3X1.5X2.5M (L/W/H) for 2t type hoist. Details should be checked according to our
quotation sheet. Also, the size can be customized according to the factual site condition. There are two doors (entrance
& exit doors) for each cage, It can be produced as up & down sliding or ramping model for safety and convenience