Design |
Overview of technical data
Type of impeller | Radial; Closed |
Maximum drive rating | 290 kW |
Impeller material (EN standard) | JL 1040; 1.4408 |
Type of bearing | Rolling element and plain bearings |
Drive frequency | 50 Hz / 60 Hz |
Maximum speed of rotation | 3. 500 1/min |
Maximum flow rate | 980 m³/h |
Maximum discharge-side pressure | 16 bar |
Top plate | Yes |
Casing material (EN standard) | 1. 4408;JL 1040 |
No. of impeller entries | Single entry |
Casing material | Cast iron; Stainless steel |
Minimum flow rate | 2 m³/h |
Suction characteristics | Non- priming |
Drive voltage | Low voltage |
eClass assignment | 36410000; 36410100;36410101 |
Pump set location | Dry installed, floodable |
Heatable | Yes |
Max. permissible fluid temperature | 300 °C |
UNSPSC classification | 4015150300 |
Main applications | Industry and process engineering |
Type of installation | Stationary |
Type of casing | Volute casing |
Type of connection | Flange |
Type of lubrication | Grease / Oil lubrication |
Type of drive | Electric motor |
Installation position | Vertical |
Shaft material (EN standard) | C45SH+ S;1.4571 SH |
Type of coupling | Direct |
Shaft seal type | Gland packing; Mechanical seal |
Maximum head | 135, 00 m |
Maximum rated pressure (discharge) | PN 16 |
Minimum head | 3, 00 m |
Nozzle position | Variable |
Casing partition | Radially split |
Maximum submergence | 9. 500 mm |