Electric Concrete Pole Making Machines High Quality


Electric Concrete Pole Making Machines High Quality

Product Description:

Factory for concrete power pole diameter 130-150-190-230-310mm electric concrete pole making machines

 

  concrete pole machine ( Order can be customized )

Inner diameter of top end (mm)Length (m)Tread (m)Running Wheel Diameter (mm)Length (m)Tread (m)Running wheel diameter (mm)
1006~72600///
1306~8
1506~11
1707~12
1907~15152650
2306~1012
27069
27069

283

6//
3106~10650//
35069700
39067009750
4306750//
4706780//
51068009850
5506850//

 

Concrete pole mould features:

          Concrete pole mould is semi-circular double-segment structure,classified cylinder mould and conical mould two 

catagories,specification:conical mould:diameter Φ100-Φ470mm,length 6-15m,taper1:75;cylinder mould:diameter Φ200-

Φ400mm,length over 6-10m;steel mould can be applied to both prestressed and reinforced concrete poles producing

Overview of concrete pole making machine :

         Concrete pole centrifugal spinning machine comprises base,supporting wheel,bearing base,controll cabinet and 

driving shaft,it is the crutial device for manufacturing and precasting concrete poles.Our concrete pole centrifugal machine 

is fabricated with wholly shaft connection,preventing the prestress intensification caused by the change of shaft 

diameter,and causing shaft breaking;the flange of the bearings can be disassembled,so it would be more convenient to 

repair and maintain

 

Working Principle:

 

1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.

 

2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.

 

3. The speed of separation is slow when the viscosity of slurry is high.

 

4. It is good for centrifugal sedimentation when the slurry density is different in each component.

FAQ:

 

Q1: Why buy Materials & Equipment from ?

A1: All products offered by are carefully selected from China's most reliable manufacturing 

enterprises. Through its ISO certifications, adheres to the highest standards and a commitment to 

supply chain safety and customer satisfaction.

Q2: How do we guarantee the quality of our products?

A2: We have established an advanced quality management system which conducts strict quality tests at every 

step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances 

as required.

Q3: How soon can we receive the product after purchase?

A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon

 international and government factors, but is typically 10 to 30 workdays.

Q4: If we can produce some wood products according to customers request?

A4: Yes, we can produce wood products according to the difference country situations to make it suitable to the 

market and customers. We have very professional technical team to make the design.

Q5: How to make a quick resolution for after service?

A5: and our manufacture both have overseas branches all-around of world, IF needed, the seller shall 

dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary 

facilities & skilled personnel at site for training.