The GQ700 back-door type machining center is No.1 in China. And it is one of Datan's pioneer machine tools. The X/Y/Z axis:1100/700/600mm, of high precision and high speed, which is particularlly suitable for mould processing. GQ series machine to0ls are for high-end users, and now it is moving fast toward Russia and Turkey. ……
| Model No. | GQ700 | GQ800 | GQ900 | GQ1300 | GQ1500 | |
| Travels | ||||||
| X axis travel/mm | 1100 | 1300 | 1100 | 1300 | 1600 | |
| Y axis travel/mm | 700 | 800 | 900 | 1300 | 1500 | |
| Z axis travel/mm | 600 | 600 | 600 | 600 | 600 | |
| Spindle nose to worktable/mm | 150-750 | 150-750 | 150-750 | 150-750 | 150-750 | |
| Worktable | ||||||
| Table size(L*W) | 1100*700 | 1300*800 | 1000*800 | 1300x1300 | 1500x1500 | |
| Gate width/mm | 900 | 1100 | 1100 | 1400 | 1600 | |
| Max load on the table/kgs | 900 | 1000 | 1000 | 1500 | 1800 | |
| Spindle | ||||||
| Spindle speed/rpm | 10000 | |||||
| Spindle taper | 7/24 Taper No.40 | |||||
| Spindle motor/kw | 7.5/11 | |||||
| Feedrate | ||||||
| X,Y axis rapid traverse(M/min) | 36 | |||||
| Z axis rapid traverse(M/min) | 24 | |||||
| Max cutting feedrate(mm/min) | 100-10000 | |||||
| A.T.C | ||||||
| Toolmagazine capacity(opt)/pcs | Arm type 16 | |||||
| Max exterior tool diameter/mm | φ150(80) | |||||
| Max tool length/mm | 300 | |||||
| Max tool weight/kgs | 8 | |||||
| Tool change time/sec（T-T） | 4.5(Arm Tpye) | |||||
| Motor | ||||||
| Z axis Spindle motor/kw | 7.5/11 | |||||
| X axis AC servo motor/kw | 3.5 | |||||
| Y Z axis AC Servo motor/kw | 3.5 | |||||
| Shield | Full cover | |||||
| Color | Standard | |||||
| Control system | FANUC-0i mate MD | |||||
| Main machine configuration | 1.milling machine control system: FANUC-0imate MD (full set) | ||
| 3.axis servo motor: FANUC from Japan | |||
| 2.Arm type A.T.C with 16 tools, | |||
| 3.10000rpm high speed 7/24 Taper No.40 Spindle | |||
| 4.Spindle bearing | |||
| 5.Crew type chip removal system | |||
| 6.heat exchanger | |||
| 7.heavy-load linear guide rails on X/Y axis | |||
| 8.automacti lubrication system | |||
| 9.work and alarm lamps | |||
| 10. releasing tool device | |||
| 11.coolant system | |||
| 12.fully enclosed splash guard | |||
| 13.rigid tapping | |||
| 14.standard accessories | |||
| Main parts supplier | 1.milling machine controller: FANUC 0i mate MD from Japan | ||
| 2.spindle motor: Fanuc from Japan | |||
| 3. 3 axis servo motor: Fanuc AC servo motor from Japan | |||
| 4. spindle bearing: NSK/FAG(P4 grade) from Japan | |||
| 5. x/y/z axis bearing: NSK/FAG (P4 grade) from Japan | |||
| 6.x/y/z ball screw: HIWIN(C3 grade) from China Taiwan | |||
| 7.spindle unit: KENTURN from China Taiwan | |||
| 8. A.T.C system: from China Taiwan | |||
| 9.lubricator system: from Japan | |||
| 10.heat exchanger: from China Taiwan | |||
| 11.electrical components: from China Taiwan | |||