Description of our Tower Crane
1) TC60/10 tower crane is one of the key product of CNBM company, which have competitive price and excellent quality, suitable for all kinds of construction project and can work under all kinds of work condition.
2) This kind of crane adopts standard section hydraulic lifting and connecting, and can decide the crane height according to the actual height of the building, and at the same time the lifting capacity will not be affected
3) It has high working speed, good speed-adjusting performance, steady operation and high efficiency. Three-speed motor and mono-speed ratio decelerator are applied in the lifting struction, which enables heavy load low speed and light load high speed.
The range-change structure drives the dolly to change range on the horizontal arm, with good positioning performance. Planet gear decelerator is applied in the circumgyrating structure, together with moment-limiting hydraulic coupler, which can relize high load capacity, steady starting and reliable operation.
4) The crane has complete set of safety devices, which can guarantee the safe and high efficienct operation of the equipment. The machine is equipped with lifting height limiter, dolly range-change limiter, moment limiter, weight limiter, circumgyrating limiter, etc.
5)The machine has scientific layout and beautiful appearance. The operator's room is set independently on one side, with good vision field. It creates a good working environment for the operator.
Advantage of our tower crane
1, boom relief Angle is big, greatly widened the equipment capacity and scope of work.
2, suitable for the group of tower cross homework.
3, boom stability is good, combination amplitude range.
4, suitable for height have special requirements occasions construction.
5, lifting capacity big, effectively solve the high steel structure construction team crane big lifting capacity requirements.
Specification of Tower Crane
Tower crane TC4808 | ||||
Item | Unit | Fall | ||
α=2 | α=4 | |||
Rated load moment | kn.m | 400 | ||
Max.load | T | 2 | 4 | |
Radius | M | 3~48 | ||
Tip max. load | t | 0.98 | 0.98 | |
Hoisting height | independent | M | 30 | |
attached | 120 | 60 | ||
Trolley speed | M/min | 34/22 | ||
Hoisting speed | 0.4 | |||
Slew speed | R/min | 0.6 | ||
Outer size of the whole crane | chasis | m | 4.6*4.6 | |
Standard section | 1.5*1.5*2.2 | |||
Height of crane(independent) | 37.185 | |||
Weight of crane | Weight of independent structure | t | 16.92 | |
Counterweight | t | 9 | ||
other | Motor capacity | kw | 26.8 | |
Top allowable wind speed | M/s | Operating≤20 | ||
Hoisting≤12 | ||||
Allowable operating temperature | 0°C | -20~+40 |