Model No. cnc vertical machining center | ME1000 | ME1100 | ME1300 | |
Capacity cnc vertical machining center | X axis travel/mm | 850 | 1100 | 1300 |
Y axis travel/mm | 560 | 600 | 700 | |
Z axis travel/mm | 610 | 550 | 610 | |
Spindle nose to table surface/mm | 150-760 | 150-700 | 150-760 | |
Spindle nose to column surface/mm | 610 | 650 | 785 | |
Worktable | Table size/(L*W) | 1000*560 | 1200*600 | 1400*650 |
Max load on the table/kg | 500 | 800 | 1000 | |
T-slot size/mm | 18*5*100 | 18*5*110 | 18*5*100 | |
Spindle | Spindle speed/rpm | 60-8000 | 60-8000 | 60-8000 |
Spindle taper/spindle shank | 7/24 Taper BT40 | 7/24 Taper BT40 | 7/24 Taper BT40 | |
Max spindle inner diameter/mm | Φ70 | Φ70 | Φ80 | |
Spindle motor(30 mins,mitsubishi)/kw | 7.5 | 11 | 11 | |
Feed rate | X,Y,Z rapid traverse/M/min | 15/15/15 | 24/24/24 | 18/18/15 |
Max cutting feed rate(M/min) | 10/10/10 | 10/10/10 | 10/10/10 | |
A.T.C | Tool storage capacity/pc | 24 | 24 | Armless type 24 |
Max tool diameter(adjacent tools)/mm | Φ150(80) | Φ150(80) | Φ150(80) | |
Max tool length/mm | 300 | 300 | 300 | |
Tool change time(T-T)/sec | 2.5 | 2.5 | 2.5 | |
Accuracy | Positioning accuracy/mm | ±0.01 | ±0.01 | ±0.01 |
Repeatability positioning accuracy/mm | ±0.005 | ±0.005 | ±0.005 | |
Machine size | Machine height/mm | 2600 | 2600 | 2600 |
Space requirement(L*W) | 2800*2450 | 3200*2500 | 3500*2700 | |
Net machine weight/kg | 5800 | 6500 | 10000 | |
Power requirement/KVA | 20 | 20 | 30 | |
Drive motor/kw | 2.0/2.0/2.0 | 2.0/3.5/2.0 | 2.0/3.5/2.0 | |
Control system | Siemens 808D | Siemens 808D | F-0iMD/M70 |
Standard machine configuration cnc vertical machining center | 1. Control system:F-0iMD/M70 . |
2. 7/24 Taper BT40 spindle ,8000rpm spindle from China Taiwan, HNC Servo motors | |
3. armless type A.T.C system,20 tools; | |
4.fully enclosed splash guard of machine | |
5.steel telescopic covers for 3 axis guide rails | |
6.work lamp and alert lamp | |
7.tool box and maintenance tool | |
8.heat exchanger | |
9.auto lubrication system | |
10.separate water tank | |
11.handwheel | |
12.380v/220v,50HZ transformer | |
13.free standard accessories | |
Main part supplier cnc vertical machining center | 1. controller: F-0iMD/M70 from China Taiwan |
2. x/y/z servo motor: HNC servo motors from China | |
3. x/y/z drive and converter: made in China | |
4. spindle motor: made in China | |
5. ball screw :made in Taiwan(Hiwin Brand) | |
6. ball screw bearing: HRB made in China(Chinese No.1 bearing) | |
7. spindle bearing :HRB from China. | |
8. handwheel: SUMTAK from Japan | |
9. electrical component: made from China Taiwan |