Specifications
Concrete Pole Plant Mould 15 Meters
Length: 6m-18m
Top diameter: 150mm-230mm/required by buyer
Taper: 1:75/required by buyer
Advantage: high quality, easy operation
Concrete pole mould is used for electronic concrete pole making. Its mainly
manufacture technology is longitudinal tension by steel wires. Then it can
squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.
In order to form concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.
Features:
1. Welding technology, which enhances the smooth finish of the mould wall, and
eliminates the uneven traces of rivet holes. So the concrete poles appearance
will be improved significantly.
2. The cylinder is changed to Utype longitudinal stiffeners which can greatly
increase the stiffness and flexural strength of the steel mould,
3. Install the slot with rubber sealing strip, in order to prevent leakage to
ensure quality.
Technical Data:
Conical electric pole steel mould
Inner diameter of top end (mm) | Length (m) | Tread (m) | Running Wheel Diameter (mm) | Length (m) | Tread (m) | Running wheel diameter (mm) |
100 | 67 | 2 | / 600 | / | / | / |
130 | 68 | |||||
150 | 611 | |||||
170 | 712 | |||||
190 | 713 | 15 | 2 | 650 | ||
230 | 69 | 12 | ||||
270 | 6 | 9 | ||||
270 | 6 | 9 | ||||
283 | 6 | 600 | / | / | ||
310 | 69 | 650 | / | / | ||
350 | 6 | 9 | 700 | |||
390 | 6 | 700 | 9 | 750 | ||
430 | 6 | 750 | / | / | ||
470 | 6 | 780 | / | / | ||
510 | 6 | 800 | 9 | 850 | ||
550 | 6 | 850 | / | / |
Working Principle:
1. The steel mould should work together with pole spinning machine. The steel mould should be placed on the spinning machine smoothly.
2. Put the mixed slurry into the mould and rotate in different directions under the motor driven.
3. In this process, the redundant water in the concrete is released by the force of centrifugal, and the concrete is dense and high strength. And then, the pole forms around the inner wall of the pole mould.