Descriptions of our tower crane TC5013B(QTZ63) Mini Self Erecting Tower Crane:
1, the topless tower crane reduce the dismounting requirements, lower weight, low mounting height, dismount each mast at a time in the air, save the labor cost, safety and fast.
2, it is suitable for crossover work of the cranes, without the tower cap and pull rod, the safety will be increased when there need the crossover work.
3, It is suitable for the special requirement about the height, such as airport nearby, tunnel, workshop ,and the construction site with high-tension cable.
4, It is suitable for the construction site that has the requirement about the crane boom, it can be used as internal climbing crane in the high-rise buildings, irregular roof or small areas.
5, It is very convenient for dismounting in the restricted construction site, dismount each crane boom at a time by manual.
6, The steel structure of crane boom has long using life and high safety standard.
7, The crane boom is good applicability, high-usage,the design of the topless tower crane boom is easy for realizing the serialization and standardization. Reduce the design and making cost.
8, Low design cost, short cycle, can much better satisfy the multiple demands of the customers.
Advantage of our tower crane TC5013B(QTZ63) Mini Self Erecting Tower Crane:
1, boom relief Angle is big, greatly widened the equipment capacity and scope of work.
2, The cranehas scientific layout and handsome appearance. The drivers cab is set independently on one side, with good vision field. It creates a good working environment for the operator..
3, boom stability is good, combination amplitude range.
4, suitable for height have special requirements occasions construction.
5, lifting capacity big, effectively solve the high steel structure construction team crane big lifting capacity requirements.
Features of our tower crane TC5013B(QTZ63) Mini Self Erecting Tower Crane:
Independent height (m) | 40 | ||||||
Max height with attachment (m) | 121 | ||||||
Working range can be adjusted(m) | 40/50 | ||||||
Min working range(m) | 2.5 | ||||||
Max lifting capacity(t) | 6 | ||||||
Tip load @ 48m(t) | 1.3 | ||||||
Hoist mechanism | Falls | 2 | 4 | ||||
Lifting capacity(t) | 1.3 | - | 3 | 3 | - | 6 | |
Speed(m/min) | 9 | 38 | 80 | 4.5 | 19 | 38 | |
Motor | YZTD225L2-4/8 /32-24/24/5.4KW | ||||||
Trolleying mechanism | Speed(m/min) | 20/40 | |||||
Motor | YZTDE132S-4 /8-3.3/2.2KW | ||||||
Slewing mechanism | Speed(r/min) | 0.6 | |||||
Motor | YZR132M2-6-3.7KW | ||||||
Climbing speed(m/min) | 0.5 | ||||||
Counterweight(t) | 11 | ||||||
Mast section size(L×W×H)m | 1.6×1.6×2.5m | ||||||
Working temperature | -40-+60°C | ||||||
Total power (KW) | 34 | ||||||
Power supply requirement (KVA) | 180KVA for generator | ||||||
Cable type ( within 30 meters from site power source to lower electric box of tower crane ) | 50mm2(3+2, 5 cores) | ||||||
Startup voltage & current | 380V×95%=361V 285A | ||||||
Rated working voltage & current | 380V 65A
| ||||||