Specifications
High End Motor Grader
1.CE certificate
2.Cummins QSB6.7 engine
3.German ZF transmission
4.ROPS/FOPS cabin
MG1320H (CE) high end motor grader
Salient Features
1. It has been awarded CE certificate by TUV.
2. This high end motor grader is powered by Cummins QSB6.7 engine, which meets EURO III, EPA Tier III standards.
3. It adopts a German ZF transmission: 6-speed (forwards) and 3-speed (reverse).
4. This heavy equipment machine is equipped with an imported multi-way valve, accumulator and other braking components.
5. Its independent cooling system is driven by a hydraulic motor.
6. This high end motor grader has a spacious ROPS/FOPS cab and a non-freon A/C.
Main Technical Parameters
Item | Unit | Value | ||
Operating Mass | kg | 17100 | ||
Diesel Engine | Model | QSB6.7 | ||
Rated Power | kW/hp | 164/220 | ||
Rated Revolution | r/min | 2200 | ||
Overall Dimensions | Standard | L × W × H | mm | 8980x2600x3470 |
With Optional Devices | L × W × H | mm | 10876x2600x3470 | |
Wheel-base | Front Axle to Rear Axle | mm | 6210 | |
Middle Wheel to Rear Wheel | mm | 1553 | ||
Wheel track | mm | 2150 | ||
Steering System | Max. Front Wheel Steering Angle | (°) | ±45 | |
Max. Articulated Wheel Steering Angle | (°) | ±20 | ||
Min. Turn Radius | mm | 7700 | ||
Moldboard | Length | mm/ft | 3960/13 | |
Height (Arched Length) | mm | 650 | ||
Max. Tilt Angle | (°) | 90 | ||
Rotating Angle | (°) | 360 | ||
Cutting Angle Adjusting Range | (°) | 42~73 | ||
Max. Lift above Ground | mm | 410 | ||
Max. Digging Depth under Ground | mm | 440 | ||
Max. Shoulder Reach (Left/Right) | mm | 1440/2090 | ||
Scarifier (Optional) | Scarifying Width | mm | 1250 | |
Max Dozing Depth | mm | 280 | ||
Number of Teeth Shanks | Piece | 11 | ||
Rear-mounted Ripper (Optional) | Max. Digging Width | mm | 2000 | |
Max. Digging Depth | mm | 315 | ||
Number of Shanks | Piece | 5 | ||
Bulldozer (Optional) | Width | mm | 2740 | |
Height | mm | 920 | ||
Max. Dozing Depth | mm | 205 |
All machines are subject to actual products. We reserve the right to make changes to the configuration and specification of our products without prior notice due to the continuous technical improvement of EW construction machines.